Our New Articles
Woodworking, Building A Work Bench: How To Utilize Your Knew Found Wood Working Skills
by Josiah Roell
There a lot of people who are interested in amateur carpentry and wood curving. The most common site of activities for these people is the garage. But wherever they may have set up their workshop, the tools seem to pose a lot of problem when they clutter and occupy a considerable space. That is why it is very important to set up a work-bench which is organized and space-saving. When a work bench is set up in a garage then it saves a lot of space. A work bench consists of an array of tools and instruments that help in curving the woods and create various items with their help. Although fully furnished work benches are easily available in the market, it is always very exciting to set up one's own and enjoy creating new things with them.
The article is an endeavor to guide you on how to make a robust work bench that would suit all your needs.
Ingredients required for a work bench are: - A 16 feet long maple wood strip - Wood planks of 2'/4' dimension.
- Sheets of hardboard to make drawer bottoms - Pine boards - Maple plywood of 8'/4' dimension and of 3/4 thicknesses.
- Screws - Drilling machine - Circular saw - Screw driver - Polyurethane glue and varnish 1. The maple wood plank should be attached to the wall studs first. A level can be used to ensure the proper positioning of the plank. The plank must be fitted about 3.5 feet above the ground with 2.5" screws. It should be always kept in mind that the garage is to house a car and so the work bench should not eat up a whole lot of space.
2. Next the shelf brackets should be fixed with the strip of wood using 1.5" screws. The uppermost bracket must be in level with the top of the upper strip. Another piece of plywood should then be fitted against the lower part of the bracket. Now the two strips of wood with rows of brackets, 2 feet away from each other make up a space saving set of shelves.
3. Now 2'/2' planks are to be cut out of the maple plywood. A plank should be fixed above the shelf bracket and the other should be screwed with the 2x4 strip of wood above. Next the other plank has to be attached as well.
5. Now another plank of wood measuring 18 feet has to be fixed with the shelf and attached to the studs with screws.
6. The plank has to be attached with glues and screws in such a way so that it is strong and hardy and can endure considerable pressure. Wood work becomes much easy when it is done on a well placed work bench. It also saves much space and makes the work quite comfortable. But one should not be expected to build a perfect work bench at the first go. It is something that requires experience. A work bench with all its utility shows how hard work never fails.
About The Author: Josiah Roell is involved with an online woodworking project that informs and educates the woodworking enthusiast through well-written articles. Discover how to get better at Wood Working, Plans, Projects, Patterns & more...
http://www.mywoodworkingexpert.com
These articles on lifestyle and more
Return to the selection of woodworking
You may want to try these articles on woodworking
Woodworking, Try Diy Woodworking by Linden J. Walhard Approximately 552 Words
Woodworking, Purchase Or Make Woodworking Jigs by Vince J. Paxton Approximately 485 Words
Woodworking, Table Saws, Miter Saws And Woodworking Jigs by Linden J. Walhard Approximately 502 Words
Woodworking, Refinishing: How To Bring Your Woodwork Back To Life by Josiah Roell Approximately 356 Words
Woodworking, Do You Have These Woodworking Tools? by Leroy K. Calstard Approximately 521 Words
Woodworking, How To Effectively Market Your Woodworking Products by Josiah Roell Approximately 343 Words
Woodworking, Woodworking: Keys For Spoting Quality Lumber by Josiah Roell Approximately 544 Words
You may want to try these websites for additional information
http://en.wikipedia.org/wiki/Woodworking
http://www.rockler.com/
http://www.osha.gov/SLTC/etools/woodworking/index.html
The information provided in this article is the express opinion of the author. Exchangenet is not responsible for the content!
There a lot of people who are interested in amateur carpentry and wood curving. The most common site of activities for these people is the garage. But wherever they may have set up their workshop, the tools seem to pose a lot of problem when they clutter and occupy a considerable space. That is why it is very important to set up a work-bench which is organized and space-saving. When a work bench is set up in a garage then it saves a lot of space. A work bench consists of an array of tools and instruments that help in curving the woods and create various items with their help. Although fully furnished work benches are easily available in the market, it is always very exciting to set up one's own and enjoy creating new things with them.
The article is an endeavor to guide you on how to make a robust work bench that would suit all your needs.
Ingredients required for a work bench are: - A 16 feet long maple wood strip - Wood planks of 2'/4' dimension.
- Sheets of hardboard to make drawer bottoms - Pine boards - Maple plywood of 8'/4' dimension and of 3/4 thicknesses.
- Screws - Drilling machine - Circular saw - Screw driver - Polyurethane glue and varnish 1. The maple wood plank should be attached to the wall studs first. A level can be used to ensure the proper positioning of the plank. The plank must be fitted about 3.5 feet above the ground with 2.5" screws. It should be always kept in mind that the garage is to house a car and so the work bench should not eat up a whole lot of space.
2. Next the shelf brackets should be fixed with the strip of wood using 1.5" screws. The uppermost bracket must be in level with the top of the upper strip. Another piece of plywood should then be fitted against the lower part of the bracket. Now the two strips of wood with rows of brackets, 2 feet away from each other make up a space saving set of shelves.
3. Now 2'/2' planks are to be cut out of the maple plywood. A plank should be fixed above the shelf bracket and the other should be screwed with the 2x4 strip of wood above. Next the other plank has to be attached as well.
5. Now another plank of wood measuring 18 feet has to be fixed with the shelf and attached to the studs with screws.
6. The plank has to be attached with glues and screws in such a way so that it is strong and hardy and can endure considerable pressure. Wood work becomes much easy when it is done on a well placed work bench. It also saves much space and makes the work quite comfortable. But one should not be expected to build a perfect work bench at the first go. It is something that requires experience. A work bench with all its utility shows how hard work never fails.
About The Author: Josiah Roell is involved with an online woodworking project that informs and educates the woodworking enthusiast through well-written articles. Discover how to get better at Wood Working, Plans, Projects, Patterns & more...
http://www.mywoodworkingexpert.com
These articles on lifestyle and more
Reprint this article free of charge as long as you keep the author's resource box or bio intact and the links active. A copy of the ezine or URL of the page where the article was reprinted emailed to the author would be very much appreciated. woodworking
Return to the selection of woodworking
You may want to try these articles on woodworking
Woodworking, Try Diy Woodworking by Linden J. Walhard Approximately 552 Words
Woodworking, Purchase Or Make Woodworking Jigs by Vince J. Paxton Approximately 485 Words
Woodworking, Table Saws, Miter Saws And Woodworking Jigs by Linden J. Walhard Approximately 502 Words
Woodworking, Refinishing: How To Bring Your Woodwork Back To Life by Josiah Roell Approximately 356 Words
Woodworking, Do You Have These Woodworking Tools? by Leroy K. Calstard Approximately 521 Words
Woodworking, How To Effectively Market Your Woodworking Products by Josiah Roell Approximately 343 Words
Woodworking, Woodworking: Keys For Spoting Quality Lumber by Josiah Roell Approximately 544 Words
You may want to try these websites for additional information
http://en.wikipedia.org/wiki/Woodworking
http://www.rockler.com/
http://www.osha.gov/SLTC/etools/woodworking/index.html
The information provided in this article is the express opinion of the author. Exchangenet is not responsible for the content!