Our New Articles
Cnc, Cnc And Cad Software - How Do I Choose The Right Cad Program For Me?
by Ivan Irons
There are multiple CAD programs available for design. Generally people become familiar with one and stick with it. As far as selecting the right one, my advice is this. Most software companies have a free trial. Thirty-day trials are common. Take advantage of these trial periods and test the software out. Then at the end, decide if you want to try another software or stick with your best one. I would advise you try out at least three different packages.
The one you select will probably have to do with you liking the interface or finding it intuitive. Keep in mind it may work for you now. A simple to use and understand interface probably has some limitations for your designs. The very best programs are complex with many tools that give you the most control. I have found that I start with a simple program and outgrow it. At some point I move up to the next level of software. This usually means a higher price as well.
Types of CAD There are different types of CAD out there. These are the ones I deal with from time to time. 2D CAD, 2.5D CAD, and 3D CAD. Here are some quick explanations of each type.
2D CAD 2D CAD is generally on the low end of CAD software packages. 2D CAD is most often vector based. The design consists on the X and Y-axis only. The designs are made up of lines, circles, ovals, slots, curves, etc. There is no “depth” to the design. Only the outline of the part is visible, to put it in a different way.
2.5D CAD All of the same descriptions above apply, but the design is prismatic. By that I mean it has the depth of the material. There are Z levels, but they are on singular planes.
3D CAD 3D CAD is on the high end of CAD software packages. 3D CAD can be solid based, wire frame based or nurbs based. The design consists on the X, Y and Z-axis. The designs are made up of lines, circles, ovals, slots, curves, etc, but can also include Spheres, Pyramids, Torrids, Cubes, etc. There is depth to the design. The design can be rotated around 360 degrees. The design is an accurate description of what the part would look like if produced in the real world.
About The Author: Ivan Irons runs http://www.cncinformation.com/CNCBlog/ Get the latest on topics like design 3d cad, computers aided design, free auto cad block.
These articles on lifestyle and more
Return to the selection of cnc
You may want to try these articles on computer
Finance, How To Get Noticed By Editors And Publishers: Make Your Strengths Shine by Shelley Wake Approximately 766 Words
Finance, It’s Good To Be A New Writer: Breaking The Myth That Experience Is Everything by Shelley Wake Approximately 739 Words
Finance, How To Be A Freelancer In Demand: Become A Busy Client’s Best Friend by Shelley Wake Approximately 812 Words
Finance, Linkadage’s Take On Google's New Search Engine Patent by John Lessnau Approximately 1004 Words
Finance, Winning Freelance Work: Beat The Skeptic by Shelley Wake Approximately 586 Words
Finance, Five Vital Questions To Ask Your Vet by Kurt Schmitt Approximately 1014 Words
Finance, Recognizing Blind Spots In Your Fat Loss Program by Bill Herren Approximately 289 Words
Finance, Free Contests May Not Cost You Money, But They Can Still Cost You by Shelley Wake Approximately 814 Words
You may want to try these websites for additional information
http://www.haascnc.com/
http://www.cncmotion.com/
http://www.cncmusicproductions.com/
The information provided in this article is the express opinion of the author. Exchangenet is not responsible for the content!
There are multiple CAD programs available for design. Generally people become familiar with one and stick with it. As far as selecting the right one, my advice is this. Most software companies have a free trial. Thirty-day trials are common. Take advantage of these trial periods and test the software out. Then at the end, decide if you want to try another software or stick with your best one. I would advise you try out at least three different packages.
The one you select will probably have to do with you liking the interface or finding it intuitive. Keep in mind it may work for you now. A simple to use and understand interface probably has some limitations for your designs. The very best programs are complex with many tools that give you the most control. I have found that I start with a simple program and outgrow it. At some point I move up to the next level of software. This usually means a higher price as well.
Types of CAD There are different types of CAD out there. These are the ones I deal with from time to time. 2D CAD, 2.5D CAD, and 3D CAD. Here are some quick explanations of each type.
2D CAD 2D CAD is generally on the low end of CAD software packages. 2D CAD is most often vector based. The design consists on the X and Y-axis only. The designs are made up of lines, circles, ovals, slots, curves, etc. There is no “depth” to the design. Only the outline of the part is visible, to put it in a different way.
2.5D CAD All of the same descriptions above apply, but the design is prismatic. By that I mean it has the depth of the material. There are Z levels, but they are on singular planes.
3D CAD 3D CAD is on the high end of CAD software packages. 3D CAD can be solid based, wire frame based or nurbs based. The design consists on the X, Y and Z-axis. The designs are made up of lines, circles, ovals, slots, curves, etc, but can also include Spheres, Pyramids, Torrids, Cubes, etc. There is depth to the design. The design can be rotated around 360 degrees. The design is an accurate description of what the part would look like if produced in the real world.
About The Author: Ivan Irons runs http://www.cncinformation.com/CNCBlog/ Get the latest on topics like design 3d cad, computers aided design, free auto cad block.
These articles on lifestyle and more
Reprint this article free of charge as long as you keep the author's resource box or bio intact and the links active. A copy of the ezine or URL of the page where the article was reprinted emailed to the author would be very much appreciated. cnc
Return to the selection of cnc
You may want to try these articles on computer
Finance, How To Get Noticed By Editors And Publishers: Make Your Strengths Shine by Shelley Wake Approximately 766 Words
Finance, It’s Good To Be A New Writer: Breaking The Myth That Experience Is Everything by Shelley Wake Approximately 739 Words
Finance, How To Be A Freelancer In Demand: Become A Busy Client’s Best Friend by Shelley Wake Approximately 812 Words
Finance, Linkadage’s Take On Google's New Search Engine Patent by John Lessnau Approximately 1004 Words
Finance, Winning Freelance Work: Beat The Skeptic by Shelley Wake Approximately 586 Words
Finance, Five Vital Questions To Ask Your Vet by Kurt Schmitt Approximately 1014 Words
Finance, Recognizing Blind Spots In Your Fat Loss Program by Bill Herren Approximately 289 Words
Finance, Free Contests May Not Cost You Money, But They Can Still Cost You by Shelley Wake Approximately 814 Words
You may want to try these websites for additional information
http://www.haascnc.com/
http://www.cncmotion.com/
http://www.cncmusicproductions.com/
The information provided in this article is the express opinion of the author. Exchangenet is not responsible for the content!
